-
Hi Collin,
Maybe these links are of some use to you. These are links from the old Innovv forum where various installations on BMWs are listed. The R1300GS is not listed, but perhaps the other models can inspire you. Unfortunately, there are no good wiring photos.
https://www.innovv-powersports.com/innovv-installation-photo
https://www.innovv-powersports.com/install-guides
Probably the biggest challenge is mounting the DVR unit out of sight.– Connect the power converter to the battery.
– Connect the yellow wire to a switched power supply, for example a 12V accessory connection or the power supply for your lighting.
– Do not use Scotch Lock Wire connectors. These will eventually cut your cables due to the vibration of the motor. Solder the connection or use good AMP crimp connectors.
– Do not route wiring along the horn. When you use the horn, it generates a strong magnetic field which can produce an interference pulse that causes the K3 to malfunction.
– The GPS receiver must be placed with the text facing upwards.
– Check whether you have tightened all connectors properly and that there are rubber rings in the connectors to keep moisture out.
– The DVR unit may become warm, this is normal.
– Do not install the camera cables too tightly.
– Install the latest K3 firmware version, available for download from the Innovv site.
– Format the SD card using the Innovv app, this works better than formatting with a computer.
– Don’t forget to enjoy your K3😃.
-
This reply was modified 9 months, 4 weeks ago by Hans.
innovv-powersports.com
Installation Photo Gallery | INNOVV
Here, you can enjoy the beautiful pictures of INNOVV motorcycle dashcam installed on different motorcycles.
-
This reply was modified 9 months, 4 weeks ago by