Forums › Forums › K6 Dashcam › Power problems › Reply To: Power problems

  • Hans

    Administrator
    2024-03-24 at 15:59

    Hi Carlos,

    1.
    What did you connect the yellow wire to? Did you do this on a switched power supply? So a power supply that switches with the motorcycle’s ignition?

    2.
    The 256 GB card, what if you format it in the K6 using the Innovv app?
    It may sometimes be the case that an SD card contains an error that can cause the K6’s software to crash.
    “Tried 3 different cards (32GB, 64GB and 128GB) with the same outcome.” Do you mean that the K6 also switched off with these cards? If the K6 also switches off with all these cards, I am thinking about the yellow wire. It could be that the power on this connection becomes too low after a few minutes, causing the K6 to switch off. On the power module, is an LED lit or flashing, and if so, what color?

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .