Forums Forums K5 Dashcam New install Function Controller Reply To: New install Function Controller

  • Hans

    Administrator
    2024-05-31 at 21:45

    Hi Jeff,

    You can try to connect the yellow wire directly to the positive terminal of the battery, then see if the K5 turns on.

    If you disconnect the power module and connect a power bank to the USB connection, see if the K5 turns on. If the K5 turns on, the problem lies with the power module. If the K5 does not turn on, remove all parts (rear camera, GPS module, etc.) one by one to see if one of these parts is defective and is preventing the K5 from turning on. Make sure that you use a power bank that can supply enough current, at least 2A.