Forums › Forums › K6 Dashcam › Thunderbox/K6 powering up issues › Reply To: Thunderbox/K6 powering up issues

  • Hans

    Administrator
    2024-08-28 at 00:35

    Hi Scott,
    I suspect that it is going wrong because the red and yellow wires are powered at the same time when the Thunderbox is turned on. You will have to connect the K6 so that the red wire is continuously powered and the yellow wire only gets power when the ignition is turned on. So only connect the yellow wire to the green wire of the Thunderbolt.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .