Forums › Forums › K3 Dashcam › INNOVV K3 WIFI light not lighted after changing the battery. › Reply To: INNOVV K3 WIFI light not lighted after changing the battery.

  • Hans

    Administrator
    2024-09-15 at 23:05

    Hi Adrian,

    In the root I mean that the firmware file is not placed in a folder on the SD card. In a FAT32 formatted SD card, the firmware file is the only file on the SD card. So no other files or folders are present.

    If the blue LED does not light up, there is a problem with the power supply. Check whether the fuse is still intact.

    You can also disconnect the power converter from the K3 and power the K3 with a power bank using the USB connection. The power bank must be able to supply enough power. If the K3 then works, you know that the problem is with the power supply.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .