Forums › Forums › K7 Dashcam › Connection via Healtech power distributor. › Reply To: Connection via Healtech power distributor.

  • Hans

    Administrator
    2025-02-23 at 22:08

    Hi James,
    It is important that the Healtech power distributor can supply enough power for the K7.
    There are several examples of similar power distributors that have caused problems because they did not supply enough power.
    If the power is cut off by the Healtech, the parking mode will not work either. There is no internal battery in the K7.
    The yellow wire is needed to be able to start the K7 correctly, and what is certainly also important is that the K7 is also switched off correctly. This is to prevent a corrupt SD card and other problems.
    What is the reason that you want to connect the K7 via a Healtech power distributor?
    My advice is to power the K7 directly from the battery. You could use your Healtech power distributor to control the yellow wire.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .