Forums › Forums › K6 Dashcam › Auto Shutdown Failure › Reply To: Auto Shutdown Failure

  • Hans

    Administrator
    2025-03-25 at 00:41

    Hi Andrey,
    Where and how did you connect the yellow wire?
    The yellow wire must be switched contact, this wire indicates to the K6 whether the K6 should switch on or off.
    The power consumption of the K6 in standby is very low. If a battery is drained by this low current below 12.5V, the LED on the power converter should flash red, see also the label on the power converter.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .