Forums › Forums › K6 Dashcam › Auto Shutdown Failure › Reply To: Auto Shutdown Failure

  • andyh

    Member
    2025-03-25 at 01:11

    I connected the yellow cable to the ACC power as specified in the K6 instructions. The DVR starts up correctly but does not shut down automatically when ignition is OFF and ACC power = 0 volt. It seems the firmware does not support the auto-shutdown feature at all.

    As a result, the dashcam kept recording video while the bike was parked in my garage for 24 hours without stopping day to day while bike inside of garage. Adiitionaly Flash memory is wearing out!

    You need to add an automatic shutdown feature to the dashcam firmware when the yellow (ACC) signal is lost. In the app, you should include an auto-shutdown option, unchecked by default. This way, users who rely on manual start/stop will not be affected. Motorbike users will need to enable the auto-shutdown option in the app

    • This reply was modified 1 month ago by  andyh.
    • This reply was modified 1 month ago by  andyh.
    • This reply was modified 1 month ago by  andyh.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .