Forums › Forums › K6 Dashcam › Auto Shutdown Failure › Reply To: Auto Shutdown Failure

  • Hans

    Administrator
    2025-03-25 at 02:01

    Hi Andrey,
    The firmware of the K6 does support the shutdown feature. I also have the K6 and it shuts down properly. As soon as the ignition is turned off, the K6 does not immediately turn off. The ongoing recording must be properly shut down by the K6, this can take a few seconds.
    Can you use a multimeter to measure whether the yellow wire is actually voltage-free after the ACC power has been shut down? To be sure that there is no leakage current anywhere that prevents the K6 from shutting down.
    It could also be that the power converter is defective. In this case, please contact Innovv via the contact form.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .