Forums › Forums › K6 Dashcam › Auto Shutdown Failure › Reply To: Auto Shutdown Failure

  • andyh

    Member
    2025-03-30 at 01:36

    I conducted a full investigation and even replaced the DC converter with a new one.
    As a result, the DC converter is working perfectly. After disconnecting the yellow ACC wire, the voltage on the VCC (2) 5.36 and ACC (1) lines drops to 0.00 volts.

    However, the dashcam still starts recording after the Wi-Fi shutdown waiting period (default: 5 minutes). I’m almost certain this is a software issue—the dashcam fails to power off themself completely after the Wi-Fi timeout.

    Please verify this behavior on your K6 unit. Pretty sure its software bug and can be fixed at firmware.

    CatchB48D
    • This reply was modified 1 month ago by  andyh.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .