Forums › Forums › K7 Dashcam › R1300 GS – Yellow wire › Reply To: R1300 GS – Yellow wire

  • Frostie

    Administrator
    2025-05-28 at 16:05

    I’ve connected my K3 via EzCan. Runs without any problems. Some years ago I have made a short guide on how to connect the K2/K3/K5 to cansmart, which also applies to the K7.

    The drawback using a cansmart adapter for powering the K7 is, that you can not use the parking mode, but you are safe against battery draining.

    If you want to use parking mode, you could connect the red and black wire to the battery and only the yellow wire to cansmart to get switched power.

    • This reply was modified 1 month, 2 weeks ago by  Frostie. Reason: Typo. Wrote "yellow", but meant "black" wire
    DC-Converter-to-Cansmart-Guide.pdf 3 MB PDF - Click to view
    Options

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .