Forums › Forums › K7 Dashcam › Missing footage and contiuous recording problem › Reply To: Missing footage and contiuous recording problem

  • Hans

    Administrator
    2025-06-20 at 14:23

    HI Tomáš,
    When the SD card is full, the oldest recordings should be automatically deleted on a FIFO (first-in-first-out) basis. This only works if the ‘Loop Recording Duration’ is set. If this is not set, the recording will stop when the SD card is full. The Wifi LED has no meaning when it comes to recordings. Only the camera LED indicates the status of the recording.

    Formatting the SD card with a computer is not recommended. An SD card formatted by a computer is sometimes not processed properly by the Innovv camera. This can cause missing recordings and the K7 to restart. Therefore, always only format using the Innovv app.

    For updating, watch this video. Video is about the K5 but the update procedure is the same for the K7. https://www.youtube.com/watch?v=sGvg1051gPI
    The update is best performed with an SD card with a size of between 8 and 32Gb.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .