Forums › Forums › K3 Dashcam › Remote not working › Reply To: Remote not working

  • Hans

    Administrator
    2025-06-24 at 02:05

    Hi Mark,
    I would first check all connectors to see if they are properly connected and have no (moisture) damage.
    Also check the power supply connections. The fact that the power LED lights up blue when the engine is off and flashes when the engine is on is not a good sign. Have you connected the yellow wire properly to a switched power supply?
    What happens if you remove the SD card, does the K3 boot properly? Also try reloading the firmware.

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .