Firmware update question - K7 Dashcam

K7 Dashcam

Firmware update question

Posted by pjgriff on 2025-06-28 at 18:56

Hi

I have just purchased the K7 and in the instructions it’s says to update the firmware.. so do I need to download the firmware on a pc or can I put the SD card in the K7 ( I have a 32 GB card I can use) format it through the app. And can I download the firmware through the app.. and I take it after I updated the firmware I can use a larger SD which I’m going to get a sandisk extreme 512 GB..

Many thanks just a bit confused on this part

Frostie replied 1 hour, 19 minutes ago 6 Members · 10 Replies
10 Replies

Bob

Member
2025-06-28 at 19:24

You must use a computer to download the new software onto an SD card.

The K7 connects to your phone using the wifi, and there is no way to connect it to the internet at the same time.

Hope this helps.
- pjgriff
  
  Member
  2025-06-28 at 22:19
  
  Thankyou you very much that’s perfect …
Hans

Administrator
2025-06-28 at 21:11

Hi Paul,
See the Innovv website for an explanation of how to update the firmware.
https://innovv.com/pages/innovv-k7-support

How To Update K7 Dashcam’s Firmware
Copy the firmware (IN-K7-1.bin) to the root of theTFcard. (Please use 8 to 32GB TF cards and the TF cards should be formatted into FAT32 in advance.)
Insert the TF card into the camera and turn it on, when the remote control blue light and green light blink alternately, please wait until the lights are off.

*Please do not power off and operate the K7 while it is updating. After the successful upgrade, the K7 will automatically boot up and the red light will solid on. The firmware will be deleted once updating is finished.

innovv.com
K7 Motorcycle Dashcam Support
INNOVV creates innovative motorcycle safety products that enhance your riding safety. Our products are the top choice for premium brand, high-end design, and reliable quality.
pjgriff

Member
2025-06-28 at 22:17

Thankyou
treborbmw

Member
2025-07-02 at 23:47
I noticed that the instructions said to update the firmware, however when I checked the support site the version to download was IK7.20241016.V04 which appears to be older than the version on my K7 which is IK7.20250317.V05. How come the support page doesn’t have this later version?

Cheers
Bob
- This reply was modified 1 day, 2 hours ago by treborbmw.
Hans

Administrator
2025-07-03 at 01:05

Hi Robert,
It is possible that Innovv just missed this. They recently rebuilt their website with a completely different look. I suspect that this is where it went ‘wrong’.

@INNOVV Can you please adjust this so that the latest firmware is available to everyone?
- fatbloke
  
  Member
  2025-07-03 at 19:04
  
  Good morning Hans,
  
  apologies for hijacking this thread, the issue i have is that i do not have access to a pc so am stuffed as to how to download the firmware.
  
  do you have a work around for this please ?
  - Hans
    
    Administrator
    2025-07-03 at 20:58
    
    Hi Tony,
    Once you have connected your phone to the K7. Open a web browser and go to http://192.168.1.254
    On the web page that opens you have access to the SD card. Maybe you can copy the firmware to the SD card this way.
    I don’t know if the above works for the K7, but it’s worth a try.
fatbloke

Member
2025-07-03 at 23:22

Hi,

Thanks for that. Have tried this and once connected won’t find that http address.

Think I have only 2 options left. Find someone with a PC and try that or, post my sd card to a forum member for them to download the firmware then post back to me…

Thanks,

Tony
Frostie

Administrator
2025-07-04 at 01:34

@Hans

At least at my iphone this doesn’t seem to work anymore. I can access the web page of the K7, but if I try to upload the firmware file via “upload files”, the safari browsers fails, stating that the network connection has been interrupted.

At the K2/K3 this way worked without any problems.