Forums › Forums › K3 Dashcam › K3

  • K3 Dashcam

    K3

    Posted by tylerallen on 2025-03-26 at 08:26

    Hi I have a k3 i have a solid red light but not a blue light when powered off but when I put the ignition on it flashes blue and no lights on the little control i then put a power bank on it and it works fine is the fuse in the DC converter surpost to be a 1A or a 2A

    Hans replied 1 month ago 2 Members · 1 Reply
  • 1 Reply

  • Hans

    Administrator
    2025-03-27 at 15:35

    Hi Tyler,
    I assume you mean the LED on the DC converter.
    If it is red, the battery voltage is too low, lower than 12.5V
    How did you connect the red, black and yellow wires?
    If you open the fuse holder you can see which fuse is in it.

    converter
    verklaring LED

Log in to reply.

Start of Discussion
0 of 0 replies June 2018
Now

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .