Forums › Forums › K5 Dashcam › INNOVV K5 camera worked for one day › Reply To: INNOVV K5 camera worked for one day

  • jedrekmac

    Member
    2024-05-04 at 16:18

    K-5 camera does not start the voltage is 13.7 volts with the engine running Film 1, after starting the engine all the LEDs light up together ie camera, GPS, Wi-fi, then the camera LED flashes 12 times and the cycle repeats, it is impossible to connect to K5. the LED on Connected power flashes steadily. Test 2 the camera was connected to the rectifier voltage 13.2-13.5V Film 2 the camera behaves the same does not start all LEDs light up together ie camera, GPS, Wi-fi, then the camera LED flashes 12 times and the cycle repeats.

    1_K-5.mov 7 MB Quicktime - Click to view
    Options
    2_K-5.mov 7 MB Quicktime - Click to view
    Options

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .