-
Hi Aaron,
I suspect that you have a power problem with your motorcycle. Can you also measure the voltage when the engine of your motorcycle is running? Did you connect the red and black wire directly to the battery?
I also suspect that the acc connection (yellow wire) is not connected to a good switched power supply. Does this yellow wire receive enough power when the ignition is turned on?
The blue LED should normally be on continuously. If it flashes, this means that the battery voltage is not correct.
If not enough power is supplied, it is possible that when the Wifi wants to start up, the K3 will fail because not enough power is supplied. Wifi requires more power
I do not know if you are trying to connect with an Android or iPhone. But iPhones can sometimes have difficulty connecting to an Innovv camera via wifi. Advice is to put the iPhone in airplane mode and then manually connect to wifi.
You have the same problem with 2x K3, have you also tried a different power module? I think the problem lies with the connections and the power supply of your motorcycle.