-
Hi Frostie,
Ok I understand better and thank you very much for all this information, I will look this weekend as soon as I can and will give you feedback on this subject!
Best regards
Rick
Hi Frostie,
I’m getting back to you because after testing today, in relation to your suggestions, here is what came out.
I checked the wifi connection and it is well recognized by my phone and in its settings on the date notified of the day with the URL 192.168.1.254.
I formatted my SD card in FAT32 on my PC.
Then from my phone, I entered the INNOVV application and after several attempts after systematically accepting the message ”Please confirm your WIFI connection to the camera” I was able to open the window in the center of the application to access the parameters of the various settings, then I formatted my SIM card again.
Subsequently, I downloaded the K2 bin file from my PC via its Internet link.
Then, I reconnected to INNOVV with my phone, and only after about ten attempts, I was able to re-enter the INNOVV settings, then the live viewing of the cameras, but, I had absolutely nothing, no visual, as well as in the window to access the files normally saved.
What I could also see in the settings of the Wifi connected to INNOVV, is that the password that I had changed as indicated in my previous emails, remained the same and never returned to the factory data 12345678, despite the formatting of the sim card?
Since then, impossible to reconnect even if the innovv wifi recognition is well recognized.
For information, I tried again with my old android phone, which worked perfectly before, the problem became identical too??
On the other hand, I have 2 observations.
Information on the converter LED
1) When the motorcycle ignition is off = blue LED lit steadily. (Normal)
2) When the ignition is on = flashing blue LED even after the DVR turns on a few seconds later.
DVR = Permanent flashing and in this order: Wifi – Camera and GPS.
3) When I turn off the ignition: Converter = LED on fixed red.
4) Then when the DVR turns off in turn = fixed blue LED of the converter.
Sometimes on the DVD the WIFI does not turn on at all, just the flashing of the camera, forcing to restart by the ignition or also by disconnecting the fuse of the converter, to restart the whole.
What do you think?
Best regards
Rick