[gertbr]

Today I cycled with the “old” battery en the new SD card. “All is well that ends well”!

Thanks for all your advice.

Gert 😀

[gertbr]

Hi Hans,

I think the problem is solved. Today I cycled with another battery and a small SD card that I used to update the firmware. All the recordings now last exactly 1 minute and are without loss of image. Now I just have to find out if it was the battery or the SD card. I suspect the latter…..

Thanks, Gert.

[gertbr]

I have installed another battery and ordered a SD U3 (now using U1). I will wait for the result and report back. Greetings, Gert

[gertbr]

Hi Hans,

I have installed the latest firmware, I have formatted the card with the INNOVV app, the power is provided by an ENERpower Battery 10.8V-11.1V (12V) 10000 mAh. The videos of both the front camera and the rear camera always have the same number and the same length. But with the videos shorter than 1 minute often a part of 10 to 20 seconds is missing…. You can see this in the recordings, but also by adding the number of seconds a film lasts to the start time and comparing this with the start time of the next recording. I hope I am clear enough. The green light showing the recording takes place, always burns steady.

Greetings, Gert.

• This reply was modified 2 months, 4 weeks ago by  gertbr.