[katchko]

OK! Problem solved.

The front cam and gps cables were disconnected for some reason 🤦🤦🤦

Thanks guys for the dedicated support.

[katchko]

Ok, I measured the voltage.

Ignition off: 12v

Ignition on: 12v

Engine running: 14v

Does that make sense? Is it OK?

[katchko]

Thanks guys for the quick responses. Not taken for granted.

I tried connecting the rear cam to the front one, but nothing happened.

I formated the SD card, flashed the firmware with the latest version, and then I could see the wifi on my phone. Unfortunately it went on and off so quick that I couldn’t connect to it, and the unit still rebooting it self.

I’ll try to see what voltage I get and let you know.

Really appreciate your help.

[katchko]

Thanks. How do I reflash the firmware? I tried disconnecting the unit from the battery for few minutes, and nothing changed. I’ll try with the power bank and let you know.

Thanks Hans

[katchko]

Thanks Hans.

The unit used to work properly, but just lately I have noticed that the remote unite is blinking (as shown in the video) and that there’s no wifi.

The inner unit has a blue blinking light.

I took out the SD card but nothing happened.

[katchko]

Thanks Hans for the reply.

As you can see in the picture, the camera is attached to the windshield structure, so it’s quite steady.

I’ll try loosening the cable, though it isn’t that tight.

Maybe it’s the fps ratio that doesn’t keep up with the fast moving images?