[Tom]

I’ve got a new rear camera ordered. Hoping that will solve that problem but I may have a new problem that the camera may not solve. Remote not lighting up and the DVR getting very hot – see my previous comment.

[Tom]

I disconnected and re-connected all cables to DVR. Now there’s a new problem. No lights on Remote. Seemed like no power however after riding 30 miles back home from my friend’s house the DVR was hot to the touch and there were still no lights on the Remote. 3 hours after I had shut off the bike the housing was even hotter I disconnected main wires to battery. After about 45 minutes the housing had cooled down to normal temp. Not sure where to start. What could possibly be wrong? Disconnected all lines to DVR. I’m thinking to reconnect DVR and battery and see if the remote lights up when ignition is turned back on. If it doesn’t where do I start. If the remote remains blank and the DVR starts to heat up again obviously I’ll need to disconnect power from battery again. But where do I go from there. Should I try to “reflash” or “reset” the DVR and if the Remote is still dead, how would I even do it?