[Martin]

This is the communication I had with Innovv:

Steven: “Installing the latest firmware will fix the problem you met.

Please download the firmware in attachment, the firmware on the website is for motorcycle version.

Please use a 8GB or 32 GB TF card, please put the card into the K6 DVR and then format it in the app.

Please do not use the firmware from website, use the one I sent you in attachment.

Copy the INNOVVK6.bin in the TF card, please note do not put it in any folder. It should be to the root of TF card directly.

Then insert the TF card back to K6, power on, it will green/red light flash until it reboot. Then please check your firmware version number in the app, it should be IK6.20230726.V1.0.01 if you update the firmware successly.”

Me: “Hi Steven – I updated the firmware with the one you included (please see attached screenshot), but the problem persists.

The micro SD card capacity is 128Gb, not 8Gb or 32Gb; could that be a problem?

Or is the app also for motorcycles only?”

Steven: “Yes, please use a 8-32 gb tf card to install the firmware.

The app is correct.”

Me: “Hi Steven – good news!

I could find only a 4Gb micro SD card, but I followed your instructions and the cameras now work as advertised!

It would appear that 32Gb is the maximum capacity for the bicycle system.

I’ll get a 32Gb card now, and if there are any problems, I’ll contact you again.

Many thanks for your help!”

[Martin]

The maximum capacity micro SD card for the bicycle system is 32Gb.

The firmware on the website is for the motorbike system.

The bicycle firmware is INNOVVK6.bin.

I couldn’t attach it, unfortunately, but it was sent to me by [email protected].

He told me to use a card 8-32Gb capacity.

I could only find a 4Gb one, but I formatted it with the app, copied the firmware to the root and everything now works fine.

So a 32Gb card is on order.

[Martin]

Hi Pat – just installed a K6 bicycle system and I’ve found exactly the same issue (rear camera mirrored and resetting not taking).

I’ve updated the firmware, but the problem persists, unfortunately.I’ve sent an email to Innovv, so if they come back with a solution that works, I’ll update this thread.

• This reply was modified 1 year, 2 months ago by  Martin.

[Martin]

Hi Hans – I’ve installed kdenlive. There is a tutorial but it looks like heavy going.

The preview on my phone shows picture-in-picture. Does that mean I can save the video in that format? Otherwise I’ll have to bite the bullet and try and follow the tutorial!