[pal]

Hi Hans,

Sorry for the delay, I’ve flashed the firmware, now showing the most up to date, I’ve also bought an adaptor to fit into the satnav feed so can see the power go off when the satnav shuts down, just tried it again, the camera will turn on just after the bike is started but it will not turn off, I left it for an hour and had to turn it off manually, I don’t have a voltage meter.

I’m pretty sure this has been happening since I fitted the camera, I thought it was the Tracker running my battery down, I’ve been turning the camera off and no more issue with the battery, could the camera be faulty, I may try to connect my old K7 up and see what happens, if it works it will prove the K6 is defective.

Regards, Paul.

[pal]

Hi Hans,

Thanks for getting back to me, the K6 starts with the ignition but when I turn the ignition off the red light stays on, I’ve watched it for more than 10 minutes until I have to shut it down manually, this is the 4th Innovv unit I’ve had and apart from a DVR and a few remotes packing up the only one that hasn’t actually functioned as expected.