[Peter]

Innovv has agreed there is a fault and I am exchanging it under warranty.

[Peter]

As I said in the OP, up until a few days ago it worked perfectly.<div>

I am more than capable of this simple install, and it is wired correctly.

I have done nothing to it mechanically to change any of its settings.

I have been caught in some torrential rain recently, but not for the first time.

Ergo it is a fault.

</div></div>

• This reply was modified 5 months, 3 weeks ago by  Peter.

[Peter]

Yes, ignition on and yellow connected there is power, but only if I have the direct live connected too. If I disconnect the constant live then the unit will not record or turn on.

The USB that the switched live is connected to does have power with the ignition on.

I can only think it is a unit fault.

• This reply was modified 5 months, 3 weeks ago by  Peter.
• This reply was modified 5 months, 3 weeks ago by  Peter.

[Peter]

I have tested the switched live(yellow) wire which is connected to a switched USB under the seat, and there is zero power running through it with the ignition on.

With the yellow disconnected the K7 still records with the ignition off.

I have now contacted Innovv with, what I think, will be a warranty claim.

I will keep you posted on their response.

Thanks for the replies.

Pete

[Peter]

I will try tomorrow