[Zahi]

I didn’t buy directly from Innovv but from Amazon and live outside the US.

[Zahi]

Hi,

Connectors are fine.

After using for few days, the issue is the radar unit.

Rear camera is working fine.

It can work fine and then start to flicker or stay one constantly.

Mostly it is the left side but can be both indicators.

As opposed to what I thought, when bick turned off, the system does go down after ~1min.

Any idea how can I get a replacement or global service?

[Zahi]

Hi,

You can see the camera’s position in the image, and the sensor is clean.

The idea that moisture may have evaporated after an hour is interesting.

I’m not sure which connector you are referring to—the one under the seat with the system’s brain, or the area marked in the second image?

Regarding the area shown in the image (the cable to the camera), I don’t see any rubber. Should I add some insulation there? The other connections are not exposed to rain, and I don’t recall them having rubber seals.

If you have a photo of what you mean, I would appreciate it.

Just to clarify: usually, only the left indicator stays on, and it turns off within a minute of switching off the motorcycle (which is normal for a BMW). To my understanding, this suggests the problem is with the detector.

Only twice have both indicators stayed on after switching the bike off, requiring me to disconnect the system from the battery.

<hr jsaction=”” jscontroller=”llbKvd” data-sfc-root=”c” jsuid=”qmYt3_1l” data-sfc-pl=”|[]” data-sfc-cb=”” data-complete=”true” data-processed=”true” data-sae=”” data-copy-service-computed-style=”font-family: "Google Sans", Arial, sans-serif; font-size: 14px; font-weight: 400; margin: 32px 0px; text-decoration: rgb(128, 128, 128); border-bottom: 0px none rgb(128, 128, 128);”>

[Zahi]

Thank you for your reply.

Vedio are recorded front and rear.

The unit in connected directly to the battery using a SAE connector I attached to it.

The yellow wire is connected to the switched fuse using a wire connector (BMW R1250GSA) as instructed in you manuals.

I also suspect it is a radar issue.

Yesterday I rechecked all the wiring again aand opened rolled cabels to make sure they are not broken.

Today I had a long rider (300km) starting with instability (light on for long periods).

After an hour or so of riding the system returned to a normal function for the rest of my trip.

The rear unit is located above the tail light and under the rear case.

Is that might be a problem? Should I play with the down angle of the unit or reposition it?

Is there a way to reset the radar or calibrate it?

• This reply was modified 1 month, 3 weeks ago by  Zahi.