

jedrekmac
Forum Replies Created
-
What about cameras that don’t see the cards and I want to change the software to eliminate errors . I have two such cameras and this is the second one which is defective. the first one damaged after 4 months and the second camera after the warranty does not see the rear camera. these are some hidden defects.
-
I have the same plobrem I tested different cards check if the camera works without a card or you can get over Wifi. I also have a second K-5 camera there the rear camera stopped working , I bought a new rear camera and same thing , I think the K-5 model is much defective than the K-3
https://forum.innovv.com/forums/discussion/innovv-k5-camera-worked-for-one-day/#post-2405
forum.innovv.com
INNOVV K5 camera worked for one day - K5 Dashcam - INNOVV Forum
INNOVV K5 camera worked for one day - K5 Dashcam - INNOVV Forum
-
good day
Camera bought from Polish distributor 28.01.2024 problem started to appear 13.04.2024
I send the invoice and declaration to [email protected]
-
K-5 camera hooked up to a new battery, starts up without a memory card there is a connection to the phone after inserting the memory card the camera does not start up, the camera LED flashes 12 times also lights up the GPS LED, Wi-fi and the cycle repeats. The wifi network on the phone does not start. A reboot of the camera was performed did not help. Tests were performed on 11 different memory cards. Camera with memory card does not start.
-
K-5 camera hooked up to a new battery, starts up without a memory card there is a connection to the phone after inserting the memory card the camera does not start up, the camera LED flashes 12 times also lights up the GPS LED, Wi-fi and the cycle repeats. The wifi network on the phone does not start. A reboot of the camera was performed did not help. Tests were performed on 11 different memory cards. Camera with memory card does not start.
Change Thumbnail -
Generating thumbnail…
-
Generating thumbnail…
-
-
K-5 camera does not start the voltage is 13.7 volts with the engine running Film 1, after starting the engine all the LEDs light up together ie camera, GPS, Wi-fi, then the camera LED flashes 12 times and the cycle repeats, it is impossible to connect to K5. the LED on Connected power flashes steadily. Test 2 the camera was connected to the rectifier voltage 13.2-13.5V Film 2 the camera behaves the same does not start all LEDs light up together ie camera, GPS, Wi-fi, then the camera LED flashes 12 times and the cycle repeats.