[stevieb]

Hi, I have the red and black wires connected to a thunder box so the cameras become live when the ignition is switched on. If I connect the red and black wires directly to the bike’s battery, it would drain it surely.

[stevieb]

How can the shock sensor work if the ignition is off? I currently have it connected via a thunder box, what is the difference? <div>

</div>

[stevieb]

I’ve put a decent SD card in the DVR, I’ll try it the next time I’m out.

I connected the yellow wire to the positive battery terminal and it doesn’t record when you skake the bike.

Someone sent me this photo connecting to a yellow wire which is the live feed to the rear light. My question is, is the rear light wire live permanently or only only when the ignition is on, which if it isn’t then wiring it through the thunderbox should work.

[stevieb]

Hi, I have changed the SD card and connected the yellow wire directly to the bike’s battery positive terminal. By doing this, I’m presuming if the bike gets knocked the cameras will start to record?

[stevieb]

Hi, how do I check the yellow wire is receiving a good signal? What colour is the brake light feed?

A San disk 256gb V2, V30 U3 should be a good enough card to use.

[stevieb]

I format the card on my laptop. The cards is V2 u3 V30

All of the lights are illuminated on the controls.

The yellow wire is connected via a thunder box.

There’s no accident /protected clips, I’ve never used that option.

[stevieb]

I changed the sd card and it’ll record when stationary but not on the move. The stationary clip will download and play.

[stevieb]

Hi, I select the video clip, download it, I’ve tried to play it using VLC and video player and it doesn’t play.

[stevieb]

I am having the same problem. I do have a VPN, so I’ll make sure it’s disconnected. Do I connect to the house internet or the K7 connection?