[Bob]

My understanding is the yellow AcC wire is the primary source of power. It turns the system on and off. While it is off it uses power from the battery through the other lead to provide power for the radar function until the voltage drops to 12.5.

So, you have to connect the yellow at a minimum. The other is optional, but I’m guessing.

I used Wago connectors to make wiring easy

Bob

[Bob]

Your phone is only used for making settings to the

“dVR” box and viewing/downloading. It is not required for your driving.

[Bob]

Yes! Latitude is supposed to be first and longitude follows, minus sign for west of prime meridian.

Good catch

I will email Innovv a bug report.

I’ve been emailing a customer service rep for a while.

• This reply was modified 2 years, 1 month ago by  Bob.

[Bob]

Did you use a minus sign to mean west of the prime meridian?

Please post a sample screen shot

[Bob]

Please don’t be offended… did you remove the plastic from the lens?

Can you do a screen capture to post here?

• This reply was modified 2 years, 1 month ago by  Bob.

[Bob]

Can you tell us exactly where you put the gps sensor please?

[Bob]

It uses a small amount of current to sense movement etc.

When voltage drops to 12.5V it shuts right down.

I have let my bike sit a few days with no issues on startup.

Jumping should not affect any attached device.

• This reply was modified 2 years, 1 month ago by  Bob.

[Bob]

Ummm, so, I wear hearing aids, but they are in my pocket while riding because the helmet knocks them off. Since I check videos as soon as I stop the bike, the sound went straight to my pocket.

Sorry…..

[Bob]

Thanks. I’ll give it a try. I just installed a new battery.

[Bob]

Got it!

May I ask if both the DVR unit and cameras run very hot?

Will this be the case when it is in “parking” mode?

Any idea of the current draw when parked? I have a locked garage so doubt I’d use it there in case it sits a week. I will use it at all,other times I’m parked.

[Bob]

Thanks, Hans. I have not used a switch yet and that is what confused me. The Can Buss isolator provides a constant voltage. I’m told it is best to use the isolated source, but I’ll go direct if necessary.

I appreciate your help!

Bob

[Bob]

Just look at it in a mirror! 😉

[Bob]

Yes, 2K

[Bob]

Do you download the video, then play it, pause and zoom in with your two fingers

This is a collage of the full image plus a zoomed in capture of the plate

[Bob]

Hans, the new K7 forum is failing to allow new posts.

Are you an Administrator for it as well?